Connecting a sand filter to your hot tub

If you don't have a sand filter yet, you've come to the right place for professional installation. We'll make sure the filter is connected correctly and ready to use right away.

A sand filter is a smart addition to your jacuzzi or hot tub, allowing you to enjoy clean and safe spa water for much longer. Water condition is extremely important. Without proper filtration and maintenance, bacteria can develop quickly, which not only harms water quality but can also pose health risks.

Interested? Send an email to [email protected] or a WhatsApp message to +316 534 687 94. We'll get back to you as soon as possible.

A sand filter ensures that the water in your hot tub is continuously filtered and circulated. The pump draws water from the hot tub and passes it through a filter vessel filled with special filter sand. The sand traps dirt, hair and other small particles. The filtered water then flows back into the hot tub.

A good hot tub filter is important: it keeps the water continuously circulating and removes skin oils, hair, dust, sand and other small dirt particles from the water.

Bacteria are controlled and removed using special chemicals. With the right combination of filtration, disinfection and regular water maintenance, the water stays clear and fresh for longer, meaning you need to fully refresh it less often.

Chemicals and filtration therefore complement each other: chlorine provides disinfection, while the filter keeps the water clean.

Order a maintenance set from AquaFinesse on our website.

1. 1. Note the starting reading: Check the value on the gauge as soon as you turn on a new or freshly rinsed sand filter pump. This is your personal baseline measurement.
   2. Check the increase: Has the pressure risen by 0.5 to 0.8 bar compared to this starting reading? Then it's time for a backwash.